Remote control lawn mowers developed earlier abroad, and there are many brands and the price is extremely high. After two years of upgrading, the remote control lawn mowers we independently developed have been improved in technical functions and put on the market on a large scale. They are especially suitable for large-scale field mowing. The following introduces the operating precautions and simple troubleshooting of remote control lawn mowers.

1. Operating procedures: Before starting the machine, check whether the gasoline is sufficient, the oil dipstick, the main switch of the appliance, and click the start button on the flat ground to see if it is normal, and increase the throttle switch to the maximum. The operator should keep a safe distance from the machine before the machine is running, press the start button, and keep it for about 10 seconds until the engine starts. Run it for about 2 minutes under no-load condition, and start the operation after confirming that the machine is normal. The operator should be equipped with protective gloves, dust masks, and protective glasses. Female operators should cover their hair to avoid accidents.

2. During the use of the remote control lawn mower, it should be guaranteed to rest for ten minutes every two hours of work to relieve the machine load to the greatest extent and extend the service life of the machine.

3. The remote control and the electrical parts of the lawn mower should be kept away from rain or water. During use, if the engine cannot be started remotely or the remote control distance becomes close, the remote control battery can be replaced in time. When the lawn mower is idle for a long time, it should be regularly inspected and maintained, and the battery should be charged every month (a 48-volt electric vehicle lead-acid battery charger is required to replenish the power, and the time should be controlled within about 4 hours, with full charge as the standard). Pay attention to moisture-proof and try to put it in a ventilated and dry space.

4. The front and rear protective rubber chains are damaged and should be replaced in time; the operator should be on the left or right side of the remote control lawn mower, avoiding the front and rear positions, and it is possible to prevent the throwing out of broken grass, broken objects, stones and other hard objects during the operation to avoid injury.

5. During the operation of the remote control lawn mower, bystanders are strictly prohibited from watching closely, especially children should keep a safe distance. Minors are prohibited from operating and operating under the influence of alcohol is prohibited.

6. When the lawn mower engine is difficult to start, it may be due to the following reasons: no gasoline, spark plug wire detached, throttle switch not in the start position, oil circuit blocked, spark plug damaged, use of inferior gasoline, air purifier blocked. The corresponding solutions are: add gasoline (92* or 95*), connect the spark plug wire, adjust the throttle switch to the maximum, clean the oil circuit, replace the spark plug, choose the correct brand (preferably use 95* unleaded gasoline), and clean the air purifier.

7. When the lawn mower shakes or vibrates violently during work, it may be caused by the following reasons: it may hit some hard objects during the mowing process, causing the blade to bend, break, and deform, which will cause vibration during the mowing process. During the use of the lawn mower, pay attention to the lawn and try to avoid hard objects. The blade needs to be replaced in time after it is damaged to avoid affecting the use effect.

The above are the operating precautions and troubleshooting methods of the remote control lawn mower. Please remember them.